OUR INVENTORY
%20New.jpg)
ELEVATOR CONTROL PANEL
Features
Microcontroller based SMD designed Main Control board.
Optically isolated inputs and outputs with LED indication.
8 Stop Down Collective.
On board Seven Segment Display.
Attendant service / Self service selection option.
Automatic off for Car Lighting and Fan.
In-built voice annunciator as well as door open buzzer facility.
High/Low Voltage detection/fluctuation protection available (optional).
Easy to select desired floor, terrace, basement and so on.
Controller can be interfaced with any VVVF drive.
Add-on Features
Same panel may use as All Reed (Per Floor) or 3 Reed (Car Top).
Any type (NO / NC) Limit Switch & Stop Button may use.
Only 12V SMPS used for easy maintenance.
Dual mode transformer for Single Phase / Two Phase input.
Emergency Stop (BB) & Maintenance speed terminals are ready.
There is no risk of buffering at high speed.
No Neutral is required for panel operation.
ARD terminal is available for operation in ARD mode.
Only single call will attend when gate lock will become short.
Extra two level safety (limit switch) may use.
3 Phase line (input) indication LED.
Low Cost : G+7 panel at below cost of G+4 panel
%2029%20June%2C%2022.jpg)
AUTOMATIC RESCUE DEVICE (ARD)
Compact Size.
Compatible with most of the panel.
Easy to installation.
Operation voltage : Single / Three Phase.
Same ARD may use for manual / auto door panel.
Only 4 Nos. battery required. (upto 7.5 HP)
Incredible price.
TOSHIBA MAKE AC VFD
Model : VFNc3E
IP Rating : IP20
Input Supply : 3 - Phase 415 V
Output Supply : 3 - Phase 415 V
Motor RPM : 960 RPM, 1440 RPM, 2880 RPM
Display : Digital
Simple Operation.
The large setting dial in front allows you to control local speed and set the parameters easily. For setting parameters, just turn the dial and push to select. The VF-nC3E can easily be operated with the RUN and STOP keys
Simple Installation
Multiple drives are mountable side-by-side, saving space when installation.The removable cover for the main circuit ensures safety.
Simple Settings
The EASY Key provides quick access up to 24 frequently-used parameters (Easy Mode).The EASY key allows to switch between Easy Mode and Standard Mode that shows all the parameters.
N.B. - We supply Toshiba VFD with preloaded parameters for Elevator operation.
TOSHIBA MAKE AC VFD
(Widely used for Auto Door operation for Lift)
Toshiba Tosvert VF-nC3 Inverter for 0.75kW (1HP) 230V 3 Ph motor in VxF control to 4.2A.
Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
Size - 72mm Wide x 131mm Deep x 143mm high in IP20 case.
Overload - 150% x 60 seconds, 200% x 0.5 seconds.
INVT MAKE AC VFD
● It’s not a new name, it’s one of many acquaintances.
● This is the complete elevator application drive.
● It’s not 3.7 KW, it’s truly 4 KW AC drive.
● The same drive can be used for Open loop and Close loop (MRL) application, where don't have to pay extra.
● The lower the price, higher the performance.
Goodrive300L series elevator AC drives are the new generation AC drives using TI 28-series DSP and advanced vector control technology, It’s improved great achievements in security, reliability, control performance and use functions.
NUMERIC DIGITAL 2000 PLUS UPS
This UPS may use as Automatic Rescue operation purpose in Elevator after power goes off.
Microprocessor controlled circuit
Built-in automatic voltage regulator
Extended battery run – time
Full time EMI / RFI suppression
Telephone / Modem / Fax / Ethernet line surge protection
Cold start capability
PC interface and advanced power software
Smart battery management
Generator compatibility
LCD display
Input / Output Supply : Single Phase 215 V.
Built-in battery (9AH 12V - 3 Nos. for 2 KVa).
Compact Size.
Onsite support under warranty.